| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.568 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES" |
| ADJS | EXTERIOR COLOR | NATURAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL CORROSION RESISTING ALL ENDS" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NUT ALUMINUM ALLOY 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | SOCKET STEEL CORROSION RESISTING 2ND END" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NUT ANODIZE 1ST END" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE 2ND END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CBBL | FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE" |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 41.000 INCHES NOMINAL WORKING" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.568 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES" |
| ADJS | EXTERIOR COLOR | NATURAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL CORROSION RESISTING ALL ENDS" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NUT ALUMINUM ALLOY 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | SOCKET STEEL CORROSION RESISTING 2ND END" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NUT ANODIZE 1ST END" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE 2ND END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CBBL | FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE" |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 41.000 INCHES NOMINAL WORKING" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
