NSN 3120-01-342-7760 (3120013427760) Bearing Plain Rod End Parts Catalog

The part belongs to NSN 3120-01-342-7760 is an Bearing Plain Rod End produced by Miscellaneous, Society Of Automotiv. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 3120-01-342-7760 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bearing Plain Rod End made by Miscellaneous, Society Of Automotiv that carries the NSN 3120-01-342-7760, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 3120013427760 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B"
AAJF	THREAD DIRECTION	LEFT-HAND"
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE"
ABHP	OVERALL LENGTH	1.7780 INCHES NOMINAL"
ABXV	BORE DIAMETER	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM"
AGGF	OUTER MEMBER OUTSIDE DIAMETER	0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM"
AGGG	BORE CENTER TO SHANK END DISTANCE	1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM"
AGGH	OUTER MEMBER WIDTH	0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM"
AGGJ	INNER MEMBER WIDTH	0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM"
AGGY	SHANK THREAD LENGTH	0.7500 INCHES MINIMUM"
AGHA	INSPECTION HOLE CENTER TO END DISTANCE	0.3745 INCHES NOMINAL"
AGHB	SHANK WIDTH ACROSS WRENCH FLATS	0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM"
AGKP	STATIC RADIAL LOAD RATING	2360 POUNDS"
AWDP	THREAD DIAMETER	0.312 INCHES NOMINAL"
CMLP	THREAD QUANTITY PER INCH	24"
CQFM	HARDNESS RATING	55.0 ROCKWELL C MINIMUM INNER MEMBER AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER28.0 ROCKWELL C MINIMUM RACE INSERT AND 37.0 ROCKWELL C MAXIMUM RACE INSERT39.0 ROCKWELL C MINIMUM ROD END BODY AND 42.0 ROCKWELL C MAXIMUM ROD END BODY"
MATT	MATERIAL	STEEL COMP 440C INNER MEMBERSTEEL COMP 630 RACE INSERTPLASTIC POLYTETRAFLUOROETHYLENE RACE LINERSTEEL COMP E4340 ROD END BODY"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBERAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERTMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY"
SFTT	SURFACE TREATMENT	CADMIUM ROD END BODY AND CHROMATE ROD END BODY"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY"
STYL	STYLE DESIGNATOR	BALL TYPE"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3B"
AAJF	THREAD DIRECTION	LEFT-HAND"
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE"
ABHP	OVERALL LENGTH	1.7780 INCHES NOMINAL"
ABXV	BORE DIAMETER	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM"
AGGF	OUTER MEMBER OUTSIDE DIAMETER	0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM"
AGGG	BORE CENTER TO SHANK END DISTANCE	1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM"
AGGH	OUTER MEMBER WIDTH	0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM"
AGGJ	INNER MEMBER WIDTH	0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM"
AGGY	SHANK THREAD LENGTH	0.7500 INCHES MINIMUM"
AGHA	INSPECTION HOLE CENTER TO END DISTANCE	0.3745 INCHES NOMINAL"
AGHB	SHANK WIDTH ACROSS WRENCH FLATS	0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM"
AGKP	STATIC RADIAL LOAD RATING	2360 POUNDS"
AWDP	THREAD DIAMETER	0.312 INCHES NOMINAL"
CMLP	THREAD QUANTITY PER INCH	24"
CQFM	HARDNESS RATING	55.0 ROCKWELL C MINIMUM INNER MEMBER AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER28.0 ROCKWELL C MINIMUM RACE INSERT AND 37.0 ROCKWELL C MAXIMUM RACE INSERT39.0 ROCKWELL C MINIMUM ROD END BODY AND 42.0 ROCKWELL C MAXIMUM ROD END BODY"
MATT	MATERIAL	STEEL COMP 440C INNER MEMBERSTEEL COMP 630 RACE INSERTPLASTIC POLYTETRAFLUOROETHYLENE RACE LINERSTEEL COMP E4340 ROD END BODY"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBERAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERTMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY"
SFTT	SURFACE TREATMENT	CADMIUM ROD END BODY AND CHROMATE ROD END BODY"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY"
STYL	STYLE DESIGNATOR	BALL TYPE"
THSD	THREAD SERIES DESIGNATOR	UNJF"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3B"

AAJF

THREAD DIRECTION

LEFT-HAND"

AAZF

SHANK STYLE

INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE"

ABHP

OVERALL LENGTH

1.7780 INCHES NOMINAL"

ABXV

BORE DIAMETER

0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM"

AGGF

OUTER MEMBER OUTSIDE DIAMETER

0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM"

AGGG

BORE CENTER TO SHANK END DISTANCE

1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM"

AGGH

OUTER MEMBER WIDTH

0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM"

AGGJ

INNER MEMBER WIDTH

0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM"

AGGY

SHANK THREAD LENGTH

0.7500 INCHES MINIMUM"

AGHA

INSPECTION HOLE CENTER TO END DISTANCE

0.3745 INCHES NOMINAL"

AGHB

SHANK WIDTH ACROSS WRENCH FLATS

0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM"

AGKP

STATIC RADIAL LOAD RATING

2360 POUNDS"

AWDP

THREAD DIAMETER

0.312 INCHES NOMINAL"

CMLP

THREAD QUANTITY PER INCH

24"

CQFM

HARDNESS RATING

55.0 ROCKWELL C MINIMUM INNER MEMBER AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER28.0 ROCKWELL C MINIMUM RACE INSERT AND 37.0 ROCKWELL C MAXIMUM RACE INSERT39.0 ROCKWELL C MINIMUM ROD END BODY AND 42.0 ROCKWELL C MAXIMUM ROD END BODY"

MATT

MATERIAL

STEEL COMP 440C INNER MEMBERSTEEL COMP 630 RACE INSERTPLASTIC POLYTETRAFLUOROETHYLENE RACE LINERSTEEL COMP E4340 ROD END BODY"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBERAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERTMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY"

SFTT

SURFACE TREATMENT

CADMIUM ROD END BODY AND CHROMATE ROD END BODY"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY"

STYL

STYLE DESIGNATOR

BALL TYPE"

THSD

THREAD SERIES DESIGNATOR

UNJF"