NSN 3120-01-217-2249 (3120012172249) Bearing Plain Rod End Parts Catalog

The part belongs to NSN 3120-01-217-2249 is an Bearing Plain Rod End produced by Miscellaneous, Society Of Automotiv, Kamatics Corp, Oldenburg Group Incorporated. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 3120-01-217-2249 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bearing Plain Rod End made by Miscellaneous, Society Of Automotiv, Kamatics Corp, Oldenburg Group Incorporated that carries the NSN 3120-01-217-2249, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 3120012172249 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B"
AAJF	THREAD DIRECTION	LEFT-HAND"
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE"
ABHP	OVERALL LENGTH	2.9180 INCHES NOMINAL"
ABXV	BORE DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM"
AGGF	OUTER MEMBER OUTSIDE DIAMETER	1.3270 INCHES MINIMUM AND 1.3470 INCHES MAXIMUM"
AGGG	BORE CENTER TO SHANK END DISTANCE	2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM"
AGGH	OUTER MEMBER WIDTH	0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM"
AGGJ	INNER MEMBER WIDTH	0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"
AGGY	SHANK THREAD LENGTH	1.2500 INCHES MINIMUM"
AGHA	INSPECTION HOLE CENTER TO END DISTANCE	0.5420 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM"
AGHB	SHANK WIDTH ACROSS WRENCH FLATS	0.7400 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM"
AGKP	STATIC RADIAL LOAD RATING	19500 POUNDS"
AWDP	THREAD DIAMETER	0.500 INCHES NOMINAL"
CMLP	THREAD QUANTITY PER INCH	20"
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT"
CQFM	HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY"
CQFM	HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER"
MATT	MATERIAL	STEEL COMP 440C OR STEEL COMP XM-13 INNER MEMBER"
MATT	MATERIAL	STEEL COMP 630 RACE INSERT"
MATT	MATERIAL	STEEL COMP E4340 ROD END BODY"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5629 ASSN STD 2ND MATERIAL RESPONSE INNER MEMBER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY"
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE ROD END BODY"
SFTT	SURFACE TREATMENT	PASSIVATE INNER MEMBER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY"
STYL	STYLE DESIGNATOR	BALL TYPE"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3B"
AAJF	THREAD DIRECTION	LEFT-HAND"
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE"
ABHP	OVERALL LENGTH	2.9180 INCHES NOMINAL"
ABXV	BORE DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM"
AGGF	OUTER MEMBER OUTSIDE DIAMETER	1.3270 INCHES MINIMUM AND 1.3470 INCHES MAXIMUM"
AGGG	BORE CENTER TO SHANK END DISTANCE	2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM"
AGGH	OUTER MEMBER WIDTH	0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM"
AGGJ	INNER MEMBER WIDTH	0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"
AGGY	SHANK THREAD LENGTH	1.2500 INCHES MINIMUM"
AGHA	INSPECTION HOLE CENTER TO END DISTANCE	0.5420 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM"
AGHB	SHANK WIDTH ACROSS WRENCH FLATS	0.7400 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM"
AGKP	STATIC RADIAL LOAD RATING	19500 POUNDS"
AWDP	THREAD DIAMETER	0.500 INCHES NOMINAL"
CMLP	THREAD QUANTITY PER INCH	20"
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT"
CQFM	HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY"
CQFM	HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER"
MATT	MATERIAL	STEEL COMP 440C OR STEEL COMP XM-13 INNER MEMBER"
MATT	MATERIAL	STEEL COMP 630 RACE INSERT"
MATT	MATERIAL	STEEL COMP E4340 ROD END BODY"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5629 ASSN STD 2ND MATERIAL RESPONSE INNER MEMBER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY"
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE ROD END BODY"
SFTT	SURFACE TREATMENT	PASSIVATE INNER MEMBER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY"
STYL	STYLE DESIGNATOR	BALL TYPE"
THSD	THREAD SERIES DESIGNATOR	UNJF"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3B"

AAJF

THREAD DIRECTION

LEFT-HAND"

AAZF

SHANK STYLE

INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE"

ABHP

OVERALL LENGTH

2.9180 INCHES NOMINAL"

ABXV

BORE DIAMETER

0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM"

AGGF

OUTER MEMBER OUTSIDE DIAMETER

1.3270 INCHES MINIMUM AND 1.3470 INCHES MAXIMUM"

AGGG

BORE CENTER TO SHANK END DISTANCE

2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM"

AGGH

OUTER MEMBER WIDTH

0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM"

AGGJ

INNER MEMBER WIDTH

0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"

AGGY

SHANK THREAD LENGTH

1.2500 INCHES MINIMUM"

AGHA

INSPECTION HOLE CENTER TO END DISTANCE

0.5420 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM"

AGHB

SHANK WIDTH ACROSS WRENCH FLATS

0.7400 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM"

AGKP

STATIC RADIAL LOAD RATING

19500 POUNDS"

AWDP

THREAD DIAMETER

0.500 INCHES NOMINAL"

CMLP

THREAD QUANTITY PER INCH

20"

CQFM

HARDNESS RATING

28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT"

CQFM

HARDNESS RATING

39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY"

CQFM

HARDNESS RATING

55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER"

MATT

MATERIAL

PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER"

MATT

MATERIAL

STEEL COMP 440C OR STEEL COMP XM-13 INNER MEMBER"

MATT

MATERIAL

STEEL COMP 630 RACE INSERT"

MATT

MATERIAL

STEEL COMP E4340 ROD END BODY"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5630 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5629 ASSN STD 2ND MATERIAL RESPONSE INNER MEMBER"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY"

SFTT

SURFACE TREATMENT

CADMIUM AND CHROMATE ROD END BODY"

SFTT

SURFACE TREATMENT

PASSIVATE INNER MEMBER"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY"

STYL

STYLE DESIGNATOR

BALL TYPE"

THSD

THREAD SERIES DESIGNATOR

UNJF"

AAJD

THREAD CLASS

3B"

AAJF

THREAD DIRECTION

LEFT-HAND"

AAZF

SHANK STYLE

INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE"

ABHP

OVERALL LENGTH

2.9180 INCHES NOMINAL"

ABXV

BORE DIAMETER

0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM"

AGGF

OUTER MEMBER OUTSIDE DIAMETER

1.3270 INCHES MINIMUM AND 1.3470 INCHES MAXIMUM"

AGGG

BORE CENTER TO SHANK END DISTANCE

2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM"

AGGH

OUTER MEMBER WIDTH

0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM"

AGGJ

INNER MEMBER WIDTH

0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"

AGGY

SHANK THREAD LENGTH

1.2500 INCHES MINIMUM"

AGHA

INSPECTION HOLE CENTER TO END DISTANCE

0.5420 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM"

AGHB

SHANK WIDTH ACROSS WRENCH FLATS

0.7400 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM"

AGKP

STATIC RADIAL LOAD RATING

19500 POUNDS"

AWDP

THREAD DIAMETER

0.500 INCHES NOMINAL"

CMLP

THREAD QUANTITY PER INCH

20"

CQFM

HARDNESS RATING

28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT"

CQFM

HARDNESS RATING

39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY"

CQFM

HARDNESS RATING

55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER"

MATT

MATERIAL

PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER"

MATT

MATERIAL

STEEL COMP 440C OR STEEL COMP XM-13 INNER MEMBER"

MATT

MATERIAL

STEEL COMP 630 RACE INSERT"

MATT

MATERIAL

STEEL COMP E4340 ROD END BODY"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5630 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5629 ASSN STD 2ND MATERIAL RESPONSE INNER MEMBER"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY"

SFTT

SURFACE TREATMENT

CADMIUM AND CHROMATE ROD END BODY"

SFTT

SURFACE TREATMENT

PASSIVATE INNER MEMBER"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY"

STYL

STYLE DESIGNATOR

BALL TYPE"

THSD

THREAD SERIES DESIGNATOR

UNJF"

NSN 3120-01-217-2249 (3120012172249) Bearing Plain Rod End Parts Catalog

Manufacturer’s List for NSN 3120-01-217-2249

Part Number's List for NSN 3120-01-217-2249

Technical Characteristics of NSN 3120012172249

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts