NSN 3020-01-425-3639 (3020014253639) Gear Spur Parts Catalog

The part belongs to NSN 3020-01-425-3639 is an Gear Spur produced by Walker O S Co Inc, General Dynamics Robotics System Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 3020-01-425-3639 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Gear Spur made by Walker O S Co Inc, General Dynamics Robotics System Inc that carries the NSN 3020-01-425-3639, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 3020014253639 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAQL	BODY STYLE	PLAIN, SOLID"
ABSX	ATTACHMENT METHOD	MOUNTING HOLE"
AGAV	END ITEM IDENTIFICATION	WEAPONS SYSTEM XM56 SMOKE GENERATOR"
AGJS	PITCH DIAMETER	6.2083 INCHES NOMINAL"
AJLA	TEETH QUANTITY	149"
ANTP	BORE STYLE	W/STEPPED COUNTERBORE BOTH ENDS"
CQFM	HARDNESS RATING	23.0 ROCKWELL C MINIMUM TEETH AND 34.0 ROCKWELL C MAXIMUM TEETH"
CQFM	HARDNESS RATING	33.0 ROCKWELL C MINIMUM BORE SURFACE AND 43.0 ROCKWELL C MAXIMUM BORE SURFACE"
CTQY	MOUNTING HOLE TYPE AND QUANTITY	1 PLAIN TRANSVERSELY THROUGH HUB, SECOND END"
CWCD	NOMINAL OUTSIDE DIAMETER	6.286 INCHES"
CWPP	PRESSURE ANGLE	25.0000 DEGREES"
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.776 INCHES SECOND END"
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	1.284 INCHES FIRST END"
CWRM	FACE NOMINAL WIDTH	0.255 INCHES"
CWRS	BORE NOMINAL DIAMETER	0.410 INCHES BOTH ENDS"
CWTB	COUNTERBORE NOMINAL DEPTH	0.780 INCHES SECOND COUNTERBORE, FIRST END"
CWTB	COUNTERBORE NOMINAL DEPTH	1.127 INCHES FIRST COUNTERBORE, FIRST END"
CWTG	COUNTERBORE NOMINAL DIAMETER	0.577 INCHES SECOND COUNTERBORE, FIRST END"
CWTG	COUNTERBORE NOMINAL DIAMETER	0.740 INCHES FIRST COUNTERBORE, FIRST END"
CWTR	HUB STYLE DESIGNATOR	1 STEP BOTH ENDS"
CWWH	END NOMINAL LENGTH	0.420 INCHES SECOND END"
CWWH	END NOMINAL LENGTH	0.930 INCHES FIRST END"
CWWN	END NOMINAL DIAMETER	1.378 INCHES FIRST END"
CWWN	END NOMINAL DIAMETER	1.378 INCHES SECOND END"
CWWS	FIRST STEP NOMINAL LENGTH	0.353 INCHES SECOND END"
CWWS	FIRST STEP NOMINAL LENGTH	0.357 INCHES FIRST END"
CWXB	FIRST STEP NOMINAL DIAMETER	1.580 INCHES FIRST END"
CWXB	FIRST STEP NOMINAL DIAMETER	1.580 INCHES SECOND END"
CWZK	MOUNTING HOLE NOMINAL DIAMETER	0.126 INCHES TRANSVERSELY THROUGH HUB, SECOND END"
MATT	III MATERIAL	STEEL COMP E9310 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS6260 SAE 9310 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	CARBON OVERALL"
STYL	STYLE DESIGNATOR	PROTRUDING HUBS"
AAQL	BODY STYLE	PLAIN, SOLID"
ABSX	ATTACHMENT METHOD	MOUNTING HOLE"
AGAV	END ITEM IDENTIFICATION	WEAPONS SYSTEM XM56 SMOKE GENERATOR"
AGJS	PITCH DIAMETER	6.2083 INCHES NOMINAL"
AJLA	TEETH QUANTITY	149"
ANTP	BORE STYLE	W/STEPPED COUNTERBORE BOTH ENDS"
CQFM	HARDNESS RATING	23.0 ROCKWELL C MINIMUM TEETH AND 34.0 ROCKWELL C MAXIMUM TEETH"
CQFM	HARDNESS RATING	33.0 ROCKWELL C MINIMUM BORE SURFACE AND 43.0 ROCKWELL C MAXIMUM BORE SURFACE"
CTQY	MOUNTING HOLE TYPE AND QUANTITY	1 PLAIN TRANSVERSELY THROUGH HUB, SECOND END"
CWCD	NOMINAL OUTSIDE DIAMETER	6.286 INCHES"
CWPP	PRESSURE ANGLE	25.0000 DEGREES"
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.776 INCHES SECOND END"
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	1.284 INCHES FIRST END"
CWRM	FACE NOMINAL WIDTH	0.255 INCHES"
CWRS	BORE NOMINAL DIAMETER	0.410 INCHES BOTH ENDS"
CWTB	COUNTERBORE NOMINAL DEPTH	0.780 INCHES SECOND COUNTERBORE, FIRST END"
CWTB	COUNTERBORE NOMINAL DEPTH	1.127 INCHES FIRST COUNTERBORE, FIRST END"
CWTG	COUNTERBORE NOMINAL DIAMETER	0.577 INCHES SECOND COUNTERBORE, FIRST END"
CWTG	COUNTERBORE NOMINAL DIAMETER	0.740 INCHES FIRST COUNTERBORE, FIRST END"
CWTR	HUB STYLE DESIGNATOR	1 STEP BOTH ENDS"
CWWH	END NOMINAL LENGTH	0.420 INCHES SECOND END"
CWWH	END NOMINAL LENGTH	0.930 INCHES FIRST END"
CWWN	END NOMINAL DIAMETER	1.378 INCHES FIRST END"
CWWN	END NOMINAL DIAMETER	1.378 INCHES SECOND END"
CWWS	FIRST STEP NOMINAL LENGTH	0.353 INCHES SECOND END"
CWWS	FIRST STEP NOMINAL LENGTH	0.357 INCHES FIRST END"
CWXB	FIRST STEP NOMINAL DIAMETER	1.580 INCHES FIRST END"
CWXB	FIRST STEP NOMINAL DIAMETER	1.580 INCHES SECOND END"
CWZK	MOUNTING HOLE NOMINAL DIAMETER	0.126 INCHES TRANSVERSELY THROUGH HUB, SECOND END"
MATT	III MATERIAL	STEEL COMP E9310 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS6260 SAE 9310 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	CARBON OVERALL"
STYL	STYLE DESIGNATOR	PROTRUDING HUBS"

MRC

Criteria

Characteristic

AAQL

BODY STYLE

PLAIN, SOLID"

ABSX

ATTACHMENT METHOD

MOUNTING HOLE"

AGAV

END ITEM IDENTIFICATION

WEAPONS SYSTEM XM56 SMOKE GENERATOR"

AGJS

PITCH DIAMETER

6.2083 INCHES NOMINAL"

AJLA

TEETH QUANTITY

149"

ANTP

BORE STYLE

W/STEPPED COUNTERBORE BOTH ENDS"

CQFM

HARDNESS RATING

23.0 ROCKWELL C MINIMUM TEETH AND 34.0 ROCKWELL C MAXIMUM TEETH"

CQFM

HARDNESS RATING

33.0 ROCKWELL C MINIMUM BORE SURFACE AND 43.0 ROCKWELL C MAXIMUM BORE SURFACE"

CTQY

MOUNTING HOLE TYPE AND QUANTITY

1 PLAIN TRANSVERSELY THROUGH HUB, SECOND END"

CWCD

NOMINAL OUTSIDE DIAMETER

6.286 INCHES"

CWPP

PRESSURE ANGLE

25.0000 DEGREES"

CWQL

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END

0.776 INCHES SECOND END"

CWQL

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END

1.284 INCHES FIRST END"

CWRM

FACE NOMINAL WIDTH

0.255 INCHES"

CWRS

BORE NOMINAL DIAMETER

0.410 INCHES BOTH ENDS"

CWTB

COUNTERBORE NOMINAL DEPTH

0.780 INCHES SECOND COUNTERBORE, FIRST END"

CWTB

COUNTERBORE NOMINAL DEPTH

1.127 INCHES FIRST COUNTERBORE, FIRST END"

CWTG

COUNTERBORE NOMINAL DIAMETER

0.577 INCHES SECOND COUNTERBORE, FIRST END"

CWTG

COUNTERBORE NOMINAL DIAMETER

0.740 INCHES FIRST COUNTERBORE, FIRST END"

CWTR

HUB STYLE DESIGNATOR

1 STEP BOTH ENDS"

CWWH

END NOMINAL LENGTH

0.420 INCHES SECOND END"

CWWH

END NOMINAL LENGTH

0.930 INCHES FIRST END"

CWWN

END NOMINAL DIAMETER

1.378 INCHES FIRST END"

CWWN

END NOMINAL DIAMETER

1.378 INCHES SECOND END"

CWWS

FIRST STEP NOMINAL LENGTH

0.353 INCHES SECOND END"

CWWS

FIRST STEP NOMINAL LENGTH

0.357 INCHES FIRST END"

CWXB

FIRST STEP NOMINAL DIAMETER

1.580 INCHES FIRST END"

CWXB

FIRST STEP NOMINAL DIAMETER

1.580 INCHES SECOND END"

CWZK

MOUNTING HOLE NOMINAL DIAMETER

0.126 INCHES TRANSVERSELY THROUGH HUB, SECOND END"

MATT

III MATERIAL

STEEL COMP E9310 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS6260 SAE 9310 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"

SFTT

SURFACE TREATMENT

CARBON OVERALL"

STYL

STYLE DESIGNATOR

PROTRUDING HUBS"

AAQL

BODY STYLE

PLAIN, SOLID"

ABSX

ATTACHMENT METHOD

MOUNTING HOLE"

AGAV

END ITEM IDENTIFICATION

WEAPONS SYSTEM XM56 SMOKE GENERATOR"

AGJS

PITCH DIAMETER

6.2083 INCHES NOMINAL"

AJLA

TEETH QUANTITY

149"

ANTP

BORE STYLE

W/STEPPED COUNTERBORE BOTH ENDS"

CQFM

HARDNESS RATING

23.0 ROCKWELL C MINIMUM TEETH AND 34.0 ROCKWELL C MAXIMUM TEETH"

CQFM

HARDNESS RATING

33.0 ROCKWELL C MINIMUM BORE SURFACE AND 43.0 ROCKWELL C MAXIMUM BORE SURFACE"

CTQY

MOUNTING HOLE TYPE AND QUANTITY

1 PLAIN TRANSVERSELY THROUGH HUB, SECOND END"

CWCD

NOMINAL OUTSIDE DIAMETER

6.286 INCHES"

CWPP

PRESSURE ANGLE

25.0000 DEGREES"

CWQL

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END

0.776 INCHES SECOND END"

CWQL

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END

1.284 INCHES FIRST END"

CWRM

FACE NOMINAL WIDTH

0.255 INCHES"

CWRS

BORE NOMINAL DIAMETER

0.410 INCHES BOTH ENDS"

CWTB

COUNTERBORE NOMINAL DEPTH

0.780 INCHES SECOND COUNTERBORE, FIRST END"

CWTB

COUNTERBORE NOMINAL DEPTH

1.127 INCHES FIRST COUNTERBORE, FIRST END"

CWTG

COUNTERBORE NOMINAL DIAMETER

0.577 INCHES SECOND COUNTERBORE, FIRST END"

CWTG

COUNTERBORE NOMINAL DIAMETER

0.740 INCHES FIRST COUNTERBORE, FIRST END"

CWTR

HUB STYLE DESIGNATOR

1 STEP BOTH ENDS"

CWWH

END NOMINAL LENGTH

0.420 INCHES SECOND END"

CWWH

END NOMINAL LENGTH

0.930 INCHES FIRST END"

CWWN

END NOMINAL DIAMETER

1.378 INCHES FIRST END"

CWWN

END NOMINAL DIAMETER

1.378 INCHES SECOND END"

CWWS

FIRST STEP NOMINAL LENGTH

0.353 INCHES SECOND END"

CWWS

FIRST STEP NOMINAL LENGTH

0.357 INCHES FIRST END"

CWXB

FIRST STEP NOMINAL DIAMETER

1.580 INCHES FIRST END"

CWXB

FIRST STEP NOMINAL DIAMETER

1.580 INCHES SECOND END"

CWZK

MOUNTING HOLE NOMINAL DIAMETER

0.126 INCHES TRANSVERSELY THROUGH HUB, SECOND END"

MATT

III MATERIAL

STEEL COMP E9310 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS6260 SAE 9310 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"

SFTT

SURFACE TREATMENT

CARBON OVERALL"

STYL

STYLE DESIGNATOR

PROTRUDING HUBS"

NSN 3020-01-425-3639 (3020014253639) Gear Spur Parts Catalog

Manufacturer’s List for NSN 3020-01-425-3639

Part Number's List for NSN 3020-01-425-3639

Technical Characteristics of NSN 3020014253639

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts