NSN 2530-00-524-9190 (2530005249190) Cylinder Assembly Hydraulic Brak Parts Catalog

The part belongs to NSN 2530-00-524-9190 is an Cylinder Assembly Hydraulic Brak produced by Airtex Products Inc, Federalmogul Corporation, Eis Inc, General Motors Llc, Bendix Corp The Industrial Tools. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 2530-00-524-9190 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Cylinder Assembly Hydraulic Brak made by Airtex Products Inc, Federalmogul Corporation, Eis Inc, General Motors Llc, Bendix Corp The Industrial Tools that carries the NSN 2530-00-524-9190, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 2530005249190 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	IRON, CAST"
ABDR	MOUNTING PROVISION	THREADED MOUNTING HOLES"
ABKW	OVERALL HEIGHT	3.000 INCHES NOMINAL"
ABMK	OVERALL WIDTH	2.250 INCHES NOMINAL"
ABXV	BORE DIAMETER	1.500 INCHES NOMINAL"
ADAR	BODY OUTSIDE DIAMETER	2.000 INCHES NOMINAL"
ADAV	OVERALL DIAMETER	2.465 INCHES NOMINAL"
AJFY	SEAT ANGLE IN DEG	42.0 SINGLE PORT"
AKBM	MOUNTING FACILITY THREAD CLASS	2B"
AKBN	MOUNTING FACILITY THREAD DIRECTION	RIGHT-HAND"
ASBP	BORE TYPE	STRAIGHT"
BBBW	MOUNTING PROVISION ARRANGEMENT STYLE	TWO HOLE"
CBBL	FEATURES PROVIDED	RUBBER BOOT"
CDTD	MOUNTING FACILITY THREAD SERIES DESIGNATOR	UNC"
CDTF	MOUNTING FACILITY THREAD DIAMETER	0.312 INCHES NOMINAL"
CDTG	MOUNTING FACILITY THREAD QUANTITY PER INCH	18"
CKSD	DESIGN CHARACTERISTICS	SINGLE ACTING SINGLE CYLINDER"
CKSF	FIRST PISTON ROD END STYLE	SLOT TYPE ALL WORKING ENDS"
CLLP	PISTON ROD END SIMILARITY	IDENTICAL"
CLMD	FIRST END FORK WIDTH	0.418 INCHES NOMINAL ALL WORKING ENDS"
CLMG	FIRST END FORK DEPTH	0.300 INCHES NOMINAL ALL WORKING ENDS"
CLMJ	FIRST END FORK SPAN WIDTH	0.380 INCHES NOMINAL ALL WORKING ENDS"
CLML	MOUNTING TYPE AND LOCATION	FLANGE CENTER SECTION"
CLMN	MOUNTING FACILITY THREAD LENGTH	0.562 INCHES NOMINAL"
CLMR	CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS	2.000 INCHES NOMINAL"
CLMS	PORT LOCATION AND QUANTITY	1 CENTER SECTION"
CLMT	PORT STYLE	INVERTED FLARE SINGLE PORT"
CLMW	PORT THREAD SERIES DESIGNATOR	UNF SINGLE PORT"
CLMX	PORT THREAD DIAMETER	0.438 INCHES NOMINAL SINGLE PORT"
CLMY	PORT THREAD QUANTITY PER INCH	20 SINGLE PORT"
CLNB	PORT THREAD CLASS	2B SINGLE PORT"
CLND	BLEEDING FEATURE QUANTITY	1"
AAFZ	BODY MATERIAL	IRON, CAST"
ABDR	MOUNTING PROVISION	THREADED MOUNTING HOLES"
ABKW	OVERALL HEIGHT	3.000 INCHES NOMINAL"
ABMK	OVERALL WIDTH	2.250 INCHES NOMINAL"
ABXV	BORE DIAMETER	1.500 INCHES NOMINAL"
ADAR	BODY OUTSIDE DIAMETER	2.000 INCHES NOMINAL"
ADAV	OVERALL DIAMETER	2.465 INCHES NOMINAL"
AJFY	SEAT ANGLE IN DEG	42.0 SINGLE PORT"
AKBM	MOUNTING FACILITY THREAD CLASS	2B"
AKBN	MOUNTING FACILITY THREAD DIRECTION	RIGHT-HAND"
ASBP	BORE TYPE	STRAIGHT"
BBBW	MOUNTING PROVISION ARRANGEMENT STYLE	TWO HOLE"
CBBL	FEATURES PROVIDED	RUBBER BOOT"
CDTD	MOUNTING FACILITY THREAD SERIES DESIGNATOR	UNC"
CDTF	MOUNTING FACILITY THREAD DIAMETER	0.312 INCHES NOMINAL"
CDTG	MOUNTING FACILITY THREAD QUANTITY PER INCH	18"
CKSD	DESIGN CHARACTERISTICS	SINGLE ACTING SINGLE CYLINDER"
CKSF	FIRST PISTON ROD END STYLE	SLOT TYPE ALL WORKING ENDS"
CLLP	PISTON ROD END SIMILARITY	IDENTICAL"
CLMD	FIRST END FORK WIDTH	0.418 INCHES NOMINAL ALL WORKING ENDS"
CLMG	FIRST END FORK DEPTH	0.300 INCHES NOMINAL ALL WORKING ENDS"
CLMJ	FIRST END FORK SPAN WIDTH	0.380 INCHES NOMINAL ALL WORKING ENDS"
CLML	MOUNTING TYPE AND LOCATION	FLANGE CENTER SECTION"
CLMN	MOUNTING FACILITY THREAD LENGTH	0.562 INCHES NOMINAL"
CLMR	CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS	2.000 INCHES NOMINAL"
CLMS	PORT LOCATION AND QUANTITY	1 CENTER SECTION"
CLMT	PORT STYLE	INVERTED FLARE SINGLE PORT"
CLMW	PORT THREAD SERIES DESIGNATOR	UNF SINGLE PORT"
CLMX	PORT THREAD DIAMETER	0.438 INCHES NOMINAL SINGLE PORT"
CLMY	PORT THREAD QUANTITY PER INCH	20 SINGLE PORT"
CLNB	PORT THREAD CLASS	2B SINGLE PORT"
CLND	BLEEDING FEATURE QUANTITY	1"

MRC

Criteria

Characteristic

AAFZ

BODY MATERIAL

IRON, CAST"

ABDR

MOUNTING PROVISION

THREADED MOUNTING HOLES"

ABKW

OVERALL HEIGHT

3.000 INCHES NOMINAL"

ABMK

OVERALL WIDTH

2.250 INCHES NOMINAL"

ABXV

BORE DIAMETER

1.500 INCHES NOMINAL"

ADAR

BODY OUTSIDE DIAMETER

2.000 INCHES NOMINAL"

ADAV

OVERALL DIAMETER

2.465 INCHES NOMINAL"

AJFY

SEAT ANGLE IN DEG

42.0 SINGLE PORT"

AKBM

MOUNTING FACILITY THREAD CLASS

2B"

AKBN

MOUNTING FACILITY THREAD DIRECTION

RIGHT-HAND"

ASBP

BORE TYPE

STRAIGHT"

BBBW

MOUNTING PROVISION ARRANGEMENT STYLE

TWO HOLE"

CBBL

FEATURES PROVIDED

RUBBER BOOT"

CDTD

MOUNTING FACILITY THREAD SERIES DESIGNATOR

UNC"

CDTF

MOUNTING FACILITY THREAD DIAMETER

0.312 INCHES NOMINAL"

CDTG

MOUNTING FACILITY THREAD QUANTITY PER INCH

18"

CKSD

DESIGN CHARACTERISTICS

SINGLE ACTING SINGLE CYLINDER"

CKSF

FIRST PISTON ROD END STYLE

SLOT TYPE ALL WORKING ENDS"

CLLP

PISTON ROD END SIMILARITY

IDENTICAL"

CLMD

FIRST END FORK WIDTH

0.418 INCHES NOMINAL ALL WORKING ENDS"

CLMG

FIRST END FORK DEPTH

0.300 INCHES NOMINAL ALL WORKING ENDS"

CLMJ

FIRST END FORK SPAN WIDTH

0.380 INCHES NOMINAL ALL WORKING ENDS"

CLML

MOUNTING TYPE AND LOCATION

FLANGE CENTER SECTION"

CLMN

MOUNTING FACILITY THREAD LENGTH

0.562 INCHES NOMINAL"

CLMR

CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS

2.000 INCHES NOMINAL"

CLMS

PORT LOCATION AND QUANTITY

1 CENTER SECTION"

CLMT

PORT STYLE

INVERTED FLARE SINGLE PORT"

CLMW

PORT THREAD SERIES DESIGNATOR

UNF SINGLE PORT"

CLMX

PORT THREAD DIAMETER

0.438 INCHES NOMINAL SINGLE PORT"

CLMY

PORT THREAD QUANTITY PER INCH

20 SINGLE PORT"

CLNB

PORT THREAD CLASS

2B SINGLE PORT"

CLND

BLEEDING FEATURE QUANTITY

AAFZ

BODY MATERIAL

IRON, CAST"

ABDR

MOUNTING PROVISION

THREADED MOUNTING HOLES"

ABKW

OVERALL HEIGHT

3.000 INCHES NOMINAL"

ABMK

OVERALL WIDTH

2.250 INCHES NOMINAL"

ABXV

BORE DIAMETER

1.500 INCHES NOMINAL"

ADAR

BODY OUTSIDE DIAMETER

2.000 INCHES NOMINAL"

ADAV

OVERALL DIAMETER

2.465 INCHES NOMINAL"

AJFY

SEAT ANGLE IN DEG

42.0 SINGLE PORT"

AKBM

MOUNTING FACILITY THREAD CLASS

2B"

AKBN

MOUNTING FACILITY THREAD DIRECTION

RIGHT-HAND"

ASBP

BORE TYPE

STRAIGHT"

BBBW

MOUNTING PROVISION ARRANGEMENT STYLE

TWO HOLE"

CBBL

FEATURES PROVIDED

RUBBER BOOT"

CDTD

MOUNTING FACILITY THREAD SERIES DESIGNATOR

UNC"

CDTF

MOUNTING FACILITY THREAD DIAMETER

0.312 INCHES NOMINAL"

CDTG

MOUNTING FACILITY THREAD QUANTITY PER INCH

18"

CKSD

DESIGN CHARACTERISTICS

SINGLE ACTING SINGLE CYLINDER"

CKSF

FIRST PISTON ROD END STYLE

SLOT TYPE ALL WORKING ENDS"

CLLP

PISTON ROD END SIMILARITY

IDENTICAL"

CLMD

FIRST END FORK WIDTH

0.418 INCHES NOMINAL ALL WORKING ENDS"

CLMG

FIRST END FORK DEPTH

0.300 INCHES NOMINAL ALL WORKING ENDS"

CLMJ

FIRST END FORK SPAN WIDTH

0.380 INCHES NOMINAL ALL WORKING ENDS"

CLML

MOUNTING TYPE AND LOCATION

FLANGE CENTER SECTION"

CLMN

MOUNTING FACILITY THREAD LENGTH

0.562 INCHES NOMINAL"

CLMR

CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS

2.000 INCHES NOMINAL"

CLMS

PORT LOCATION AND QUANTITY

1 CENTER SECTION"

CLMT

PORT STYLE

INVERTED FLARE SINGLE PORT"

CLMW

PORT THREAD SERIES DESIGNATOR

UNF SINGLE PORT"

CLMX

PORT THREAD DIAMETER

0.438 INCHES NOMINAL SINGLE PORT"

CLMY

PORT THREAD QUANTITY PER INCH

20 SINGLE PORT"

CLNB

PORT THREAD CLASS

2B SINGLE PORT"

CLND

BLEEDING FEATURE QUANTITY

airtex products inc	bendix corp the industrial tools	echlin inc	eis inc
federalmogul corporation	general motors llc

NSN 2530-00-524-9190 (2530005249190) Cylinder Assembly Hydraulic Brak Parts Catalog

Manufacturer’s List for NSN 2530-00-524-9190

Part Number's List for NSN 2530-00-524-9190

Technical Characteristics of NSN 2530005249190

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts