Search By:
Thanks for Visiting Us At ASAP AOG!

Thanks for Visiting Us At ASAP AOG! Before You Go, Why Not Take a Look at Our Aircraft Parts Catalog? You Can Get One of the Most Competitive Quotes On the Market In 15 Minutes Or Less.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

NSN 2520-01-474-3901 (2520014743901) Shaft Axle Automotive Parts Catalog

The part belongs to NSN 2520-01-474-3901 is an Shaft Axle Automotive produced by Gkn Aerospace Inc, Am General Llc, Inspektorat Wsparcia Sil Zbrojnych, Ncb Hungary Honvedsegi Egyseges Termekkod, Miscellaneous. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 2520-01-474-3901 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Shaft Axle Automotive made by Gkn Aerospace Inc, Am General Llc, Inspektorat Wsparcia Sil Zbrojnych, Ncb Hungary Honvedsegi Egyseges Termekkod, Miscellaneous that carries the NSN 2520-01-474-3901, you can rely on us to provide you with the necessary parts from our available inventory.


At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 2520014743901 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.


Alternative NSN: 2520-01-474-3901
Item Name: Shaft Axle Automotive
FSG: 25 Vehicular Equipment Components
Federal Supply Class (FSC): 2520 Vehicular Power Transmission Components
NCB Code: USA (01)
Manufacturers: Am General Llc, Gkn Aerospace Inc, Inspektorat Wsparcia Sil Zbrojnych, Miscellaneous, Ncb Hungary Honvedsegi Egyseges Termekkod

Part Number's List for NSN 2520-01-474-3901

Part No.
Manufacturer
Item Name
Availability
RFQ
Shaft Axle Automotive
YES
RFQ
Shaft Axle Automotive
YES
RFQ
Shaft Axle Automotive
YES
RFQ
Shaft Axle Automotive
YES
RFQ
Shaft Axle Automotive
YES
RFQ
Shaft Axle Automotive
YES
RFQ

Technical Characteristics of NSN 2520014743901

MRCCriteriaCharacteristic
AAUBHOLE DIAMETER0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
ABHPOVERALL LENGTH29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM
AGAVEND ITEM IDENTIFICATIONNSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V
AHTCFLANGE OUTSIDE DIAMETER2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM
AMDMFIRST END SPLINE LENGTH3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
AMGASECOND END SPLINE LENGTH3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
AMGBSECOND END SPLINE MINOR DIAMETER1.282 INCHES NOMINAL
AMGCSECOND END SPLINE MAJOR DIAMETER1.375 INCHES NOMINAL
AMGFSECOND END PITCH DIAMETER0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
AMHFSECOND END GEAR OUTSIDE DIAMETER1.375 INCHES NOMINAL
AMQAFIRST END TYPEFLANGED
AMQFSECOND END TYPESPLINED
AXHRMOUNTING FACILITY TYPE AND QUANTITY6 UNTHREADED HOLE
BNTHSECOND END GEAR TEETH QUANTITY32
BNTJSECOND END GEAR TEETH PRESSURE ANGLE IN DEG45.0
BNTMSECOND END SPLINE TYPEINVOLUTE
BNTNSECOND END SPLINE PRESSURE ANGLE IN DEG45.0
BNYSFLANGE OVERALL THICKNESS0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM
BNYTFLANGE THICKNESS AT MOUNTING HOLE0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
FEATSPECIAL FEATURESITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167
AAUBHOLE DIAMETER0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
ABHPOVERALL LENGTH29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM
AGAVEND ITEM IDENTIFICATIONNSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V
AHTCFLANGE OUTSIDE DIAMETER2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM
AMDMFIRST END SPLINE LENGTH3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
AMGASECOND END SPLINE LENGTH3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
AMGBSECOND END SPLINE MINOR DIAMETER1.282 INCHES NOMINAL
AMGCSECOND END SPLINE MAJOR DIAMETER1.375 INCHES NOMINAL
AMGFSECOND END PITCH DIAMETER0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
AMHFSECOND END GEAR OUTSIDE DIAMETER1.375 INCHES NOMINAL
AMQAFIRST END TYPEFLANGED
AMQFSECOND END TYPESPLINED
AXHRMOUNTING FACILITY TYPE AND QUANTITY6 UNTHREADED HOLE
BNTHSECOND END GEAR TEETH QUANTITY32
BNTJSECOND END GEAR TEETH PRESSURE ANGLE IN DEG45.0
BNTMSECOND END SPLINE TYPEINVOLUTE
BNTNSECOND END SPLINE PRESSURE ANGLE IN DEG45.0
BNYSFLANGE OVERALL THICKNESS0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM
BNYTFLANGE THICKNESS AT MOUNTING HOLE0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
FEATSPECIAL FEATURESITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167