NSN 6020-01-282-2518 (6020012822518) Cable Assembly Fiber Optic Parts Catalog

The part belongs to NSN 6020-01-282-2518 is an Cable Assembly Fiber Optic produced by Avago Technologies. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 6020-01-282-2518 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Cable Assembly Fiber Optic made by Avago Technologies that carries the NSN 6020-01-282-2518, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 6020012822518 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AGAV	End Item Identification	MK74MOD14
FEAT	Special Features	FIBER OPTIC CABLE SHOULD CONSIST OF A SINGLE FUSED SILICA,PARTIALLY GRADED INDEX; GLASS CLAD FIBER SURROUNDED BY SILICONE COATING; BUFFER JACKET; AND TENSILE STRENGTH MEMBERS; THEN COVERED BY SCUFF-RESISTANT OUTER JACKET; PROPAGATION DELAYS INCREASE AT 5 NS PER METER OF CABLE LENGTH INCREASE; DATA RATE: AS LIMITED BY PULSE WIDTH DISTORTION,IS NOT AFFECTED BY INCREASING CABLE LENGTH,IF THE OPTICAL POWER LEVEL IS MAINTAINED; NOMINAL PROPAGATION DELAY 6 NS; CABLE LENGTH SHALL BE 11.500 NOMINAL TO 12.000 INCHES MAXIMUM; FORWARD PEAK CURRENT: SHOULD NOT BE LESS THAN 10.0 MA,IN THE ON STATE WITH NO DUTY FACTOR RESTRICTION; OPERATING TEMPERATURE: MINUS 20.0 TO PLUS 70.0 DEGREES CELSIUS MAX; FLEXING: 180.0 DEGREES BENDING AT MINIMUM BEND RADIUS OF 20.0 MM NO LOAD,TO A TENSILE LOAD OF 2.25 POUNDS MAX; CABLE CONNECTORS 0.300 TO 0.330 INCHES HEX NOMINAL; THREAD ENDS ARE 0.250-36 UNF-2B
MRC	Decoded Requirement	Clear Text Reply

MRC

Criteria

Characteristic

AGAV

End Item Identification

MK74MOD14

FEAT

Special Features

FIBER OPTIC CABLE SHOULD CONSIST OF A SINGLE FUSED SILICA,PARTIALLY GRADED INDEX; GLASS CLAD FIBER SURROUNDED BY SILICONE COATING; BUFFER JACKET; AND TENSILE STRENGTH MEMBERS; THEN COVERED BY SCUFF-RESISTANT OUTER JACKET; PROPAGATION DELAYS INCREASE AT 5 NS PER METER OF CABLE LENGTH INCREASE; DATA RATE: AS LIMITED BY PULSE WIDTH DISTORTION,IS NOT AFFECTED BY INCREASING CABLE LENGTH,IF THE OPTICAL POWER LEVEL IS MAINTAINED; NOMINAL PROPAGATION DELAY 6 NS; CABLE LENGTH SHALL BE 11.500 NOMINAL TO 12.000 INCHES MAXIMUM; FORWARD PEAK CURRENT: SHOULD NOT BE LESS THAN 10.0 MA,IN THE ON STATE WITH NO DUTY FACTOR RESTRICTION; OPERATING TEMPERATURE: MINUS 20.0 TO PLUS 70.0 DEGREES CELSIUS MAX; FLEXING: 180.0 DEGREES BENDING AT MINIMUM BEND RADIUS OF 20.0 MM NO LOAD,TO A TENSILE LOAD OF 2.25 POUNDS MAX; CABLE CONNECTORS 0.300 TO 0.330 INCHES HEX NOMINAL; THREAD ENDS ARE 0.250-36 UNF-2B

MRC

Decoded Requirement

Clear Text Reply

NSN 6020-01-282-2518 (6020012822518) Cable Assembly Fiber Optic Parts Catalog

Manufacturer’s List for NSN 6020-01-282-2518

Part Number's List for NSN 6020-01-282-2518

Technical Characteristics of NSN 6020012822518

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts