| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 0.412 INCHES NOMINAL" |
| ABJT | TERMINAL LENGTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM" |
| ABPM | BODY DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM" |
| ADAV | III OVERALL DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | TERMINAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION" |
| FEAT | SPECIAL FEATURES | SCREWDRIVER SLOT PROVIDED FOR ADJUSTMENT" |
| TEST | TEST DATA DOCUMENT | 18876-10125246 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 0.412 INCHES NOMINAL" |
| ABJT | TERMINAL LENGTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM" |
| ABPM | BODY DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM" |
| ADAV | III OVERALL DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | TERMINAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION" |
| FEAT | SPECIAL FEATURES | SCREWDRIVER SLOT PROVIDED FOR ADJUSTMENT" |
| TEST | TEST DATA DOCUMENT | 18876-10125246 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
