NSN 5306-00-150-9972 (5306001509972) Bolt Machine Parts Catalog

The part belongs to NSN 5306-00-150-9972 is an Bolt Machine produced by Aeronautical Standards Group. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5306-00-150-9972 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bolt Machine made by Aeronautical Standards Group that carries the NSN 5306-00-150-9972, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5306001509972 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.625 INCHES MINIMUM AND 0.703 INCHES MAXIMUM"
AASB	FASTENER LENGTH	6.203 INCHES MINIMUM AND 6.250 INCHES MAXIMUM"
AASK	HEAD STYLE	HEXAGON"
AASU	HEAD HEIGHT	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"
AATB	WIDTH BETWEEN FLATS	0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE"
AHYM	NOMINAL THREAD DIAMETER	0.438 INCHES"
ANEE	GRIP LENGTH	5.547 INCHES MINIMUM AND 5.578 INCHES MAXIMUM"
CBBL	FEATURES PROVIDED	FINISHED HEAD"
CMLP	THREAD QUANTITY PER INCH	20"
CQBC	MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH"
CQFM	HARDNESS RATING	26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	6.031 INCHES MINIMUM FIRST HOLE AND 6.062 INCHES MAXIMUM FIRST HOLE"
MATT	MATERIAL	STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATE"
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.625 INCHES MINIMUM AND 0.703 INCHES MAXIMUM"
AASB	FASTENER LENGTH	6.203 INCHES MINIMUM AND 6.250 INCHES MAXIMUM"
AASK	HEAD STYLE	HEXAGON"
AASU	HEAD HEIGHT	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"
AATB	WIDTH BETWEEN FLATS	0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE"
AHYM	NOMINAL THREAD DIAMETER	0.438 INCHES"
ANEE	GRIP LENGTH	5.547 INCHES MINIMUM AND 5.578 INCHES MAXIMUM"
CBBL	FEATURES PROVIDED	FINISHED HEAD"
CMLP	THREAD QUANTITY PER INCH	20"
CQBC	MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH"
CQFM	HARDNESS RATING	26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	6.031 INCHES MINIMUM FIRST HOLE AND 6.062 INCHES MAXIMUM FIRST HOLE"
MATT	MATERIAL	STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATE"
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNF"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3A"

AAJF

THREAD DIRECTION

RIGHT-HAND"

AASA

THREAD LENGTH

0.625 INCHES MINIMUM AND 0.703 INCHES MAXIMUM"

AASB

FASTENER LENGTH

6.203 INCHES MINIMUM AND 6.250 INCHES MAXIMUM"

AASK

HEAD STYLE

HEXAGON"

AASU

HEAD HEIGHT

0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"

AATB

WIDTH BETWEEN FLATS

0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM"

AAWB

SHANK UNTHREADED HOLE DIAMETER

0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE"

AHYM

NOMINAL THREAD DIAMETER

0.438 INCHES"

ANEE

GRIP LENGTH

5.547 INCHES MINIMUM AND 5.578 INCHES MAXIMUM"

CBBL

FEATURES PROVIDED

FINISHED HEAD"

CMLP

THREAD QUANTITY PER INCH

20"

CQBC

MINIMUM TENSILE STRENGTH

125000 POUNDS PER SQUARE INCH"

CQFM

HARDNESS RATING

26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL"

CRZS

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER

6.031 INCHES MINIMUM FIRST HOLE AND 6.062 INCHES MAXIMUM FIRST HOLE"

MATT

MATERIAL

STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATE"

SFTT

SURFACE TREATMENT

CADMIUM OVERALL AND CHROMATE OVERALL"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"

THSD

THREAD SERIES DESIGNATOR

UNF"