NSN 4720-00-531-4125 (4720005314125) Hose Assembly Nonmetallic Parts Catalog

The part belongs to NSN 4720-00-531-4125 is an Hose Assembly Nonmetallic produced by Aeronautical Standards Group. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 4720-00-531-4125 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Hose Assembly Nonmetallic made by Aeronautical Standards Group that carries the NSN 4720-00-531-4125, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 4720005314125 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AARX	INSIDE DIAMETER	0.250 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 160.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.470 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	4.000 INCHES"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKXL	END FITTING COMPONENT AND MATERIAL	COMPLETE FITTING ALUMINUM ALLOY ALL ENDS"
AKXM	FITTING COMPONENT AND SURFACE TREATMENT	COMPLETE FITTING ANODIZE 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CQBD	BURST TEST PRESSURE	1250.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER MOLDED RUBBER"
CQGM	MAXIMUM OPERATING PRESSURE	200.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.438 INCHES 1ST END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	400.0 POUNDS PER SQUARE INCH"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	ALCOHOL RESISTANT AND OIL RESISTANT AND WATER RESISTANT"
CRSM	VACUUM IN TORR	50.8"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	25.000 INCHES NOMINAL WORKING"
FEAT	SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"
ZZZK	SPECIFICATION/STANDARD DATA	88044-AN6270 GOVERNMENT STANDARD"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AARX	INSIDE DIAMETER	0.250 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 160.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.470 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	4.000 INCHES"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKXL	END FITTING COMPONENT AND MATERIAL	COMPLETE FITTING ALUMINUM ALLOY ALL ENDS"
AKXM	FITTING COMPONENT AND SURFACE TREATMENT	COMPLETE FITTING ANODIZE 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CQBD	BURST TEST PRESSURE	1250.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER MOLDED RUBBER"
CQGM	MAXIMUM OPERATING PRESSURE	200.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.438 INCHES 1ST END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	400.0 POUNDS PER SQUARE INCH"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	ALCOHOL RESISTANT AND OIL RESISTANT AND WATER RESISTANT"
CRSM	VACUUM IN TORR	50.8"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	25.000 INCHES NOMINAL WORKING"
FEAT	SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"
ZZZK	SPECIFICATION/STANDARD DATA	88044-AN6270 GOVERNMENT STANDARD"

MRC

Criteria

Characteristic

AAGR

CROSS-SECTIONAL SHAPE STYLE

ROUND"

AAJD

THREAD CLASS

3B 1ST END"

AAJF

THREAD DIRECTION

RIGHT-HAND 1ST END"

AARX

INSIDE DIAMETER

0.250 INCHES NOMINAL"

ABJH

TEMP RATING

-65.0 DEG FAHRENHEIT AND 160.0 DEG FAHRENHEIT SINGLE RESPONSE"

ABKV

OUTSIDE DIAMETER

0.470 INCHES NOMINAL"

ACKH

MINIMUM INSIDE BENDING RADIUS

4.000 INCHES"

AHNC

CONNECTION STYLE

SWIVEL NUT FLARE 1ST END"

AKUU

END CONNECTION DESIGN

STRAIGHT 1ST END"

AKXL

END FITTING COMPONENT AND MATERIAL

COMPLETE FITTING ALUMINUM ALLOY ALL ENDS"

AKXM

FITTING COMPONENT AND SURFACE TREATMENT

COMPLETE FITTING ANODIZE 1ST END"

AWLS

CONNECTION TYPE

THREADED INTERNAL TUBE 1ST END"

CQBD

BURST TEST PRESSURE

1250.0 POUNDS PER SQUARE INCH"

CQCS

LAYER COMPOSITION AND LOCATION

OUTER LAYER MOLDED RUBBER"

CQGM

MAXIMUM OPERATING PRESSURE

200.0 POUNDS PER SQUARE INCH"

CQJX

NOMINAL THREAD SIZE

0.438 INCHES 1ST END"

CQRB

SEAT ANGLE

37.0 DEGREES 1ST END"

CRDW

HYDROSTATIC TEST PRESSURE

400.0 POUNDS PER SQUARE INCH"

CRJM

OUTER COVERING ENVIRONMENTAL PROTECTION

ALCOHOL RESISTANT AND OIL RESISTANT AND WATER RESISTANT"

CRSM

VACUUM IN TORR

50.8"

CRWL

INSIDE SURFACE CONDITION

SMOOTH"

CRXX

MEASURING METHOD AND LENGTH

25.000 INCHES NOMINAL WORKING"

FEAT

SPECIAL FEATURES

INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC"

MEDA

MEDIA FOR WHICH DESIGNED

FUEL/OIL, HYDROCARBON SINGLE RESPONSE"

THSD

THREAD SERIES DESIGNATOR

UNJF 1ST END"

ZZZK

SPECIFICATION/STANDARD DATA

88044-AN6270 GOVERNMENT STANDARD"