NSN 4720-00-127-8966 (4720001278966) Hose Assembly Nonmetallic Parts Catalog

The part belongs to NSN 4720-00-127-8966 is an Hose Assembly Nonmetallic produced by Ware Machine Works Inc, Veyance Technologies Inc, Anchor Swan Corp Sub Of Amerace, Tri State Hose And Fitting Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 4720-00-127-8966 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Hose Assembly Nonmetallic made by Ware Machine Works Inc, Veyance Technologies Inc, Anchor Swan Corp Sub Of Amerace, Tri State Hose And Fitting Inc that carries the NSN 4720-00-127-8966, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 4720001278966 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	1A 2ND END"
AAJD	THREAD CLASS	2A 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.500 INCHES NOMINAL"
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM"
ACKH	MINIMUM INSIDE BENDING RADIUS	7.000 INCHES"
AHNC	CONNECTION STYLE	EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END"
AHNC	CONNECTION STYLE	FLARED 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 2ND END"
AKXL	END FITTING COMPONENT AND MATERIAL	COMPLETE FITTING STEEL ALL ENDS"
AKXM	FITTING COMPONENT AND SURFACE TREATMENT	COMPLETE FITTING CADMIUM 1ST END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL BOSS 2ND END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL TUBE 1ST END"
CQBD	BURST TEST PRESSURE	14000.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	2ND LAYER MOLDED RUBBER, SYNTHETIC"
CQCS	LAYER COMPOSITION AND LOCATION	3RD LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER MOLDED RUBBER, SYNTHETIC"
CQGM	MAXIMUM OPERATING PRESSURE	3500.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 2ND END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	7000.0 POUNDS PER SQUARE INCH"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	ABRASION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	91.000 INCHES NOMINAL OVERALL"
FEAT	SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; PRESS-ON TYPE FITTINGS"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UNF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNF 2ND END"
ZZZK	SPECIFICATION/STANDARD DATA	SAE 100R2,TYPE A NATIONAL STD/SPEC"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	1A 2ND END"
AAJD	THREAD CLASS	2A 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.500 INCHES NOMINAL"
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM"
ACKH	MINIMUM INSIDE BENDING RADIUS	7.000 INCHES"
AHNC	CONNECTION STYLE	EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END"
AHNC	CONNECTION STYLE	FLARED 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 2ND END"
AKXL	END FITTING COMPONENT AND MATERIAL	COMPLETE FITTING STEEL ALL ENDS"
AKXM	FITTING COMPONENT AND SURFACE TREATMENT	COMPLETE FITTING CADMIUM 1ST END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL BOSS 2ND END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL TUBE 1ST END"
CQBD	BURST TEST PRESSURE	14000.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	2ND LAYER MOLDED RUBBER, SYNTHETIC"
CQCS	LAYER COMPOSITION AND LOCATION	3RD LAYER BRAIDED STEEL WIRE"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER MOLDED RUBBER, SYNTHETIC"
CQGM	MAXIMUM OPERATING PRESSURE	3500.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 2ND END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	7000.0 POUNDS PER SQUARE INCH"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	ABRASION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	91.000 INCHES NOMINAL OVERALL"
FEAT	SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; PRESS-ON TYPE FITTINGS"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UNF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNF 2ND END"
ZZZK	SPECIFICATION/STANDARD DATA	SAE 100R2,TYPE A NATIONAL STD/SPEC"

MRC

Criteria

Characteristic

AAGR

CROSS-SECTIONAL SHAPE STYLE

ROUND"

AAJD

THREAD CLASS

1A 2ND END"

AAJD

THREAD CLASS

2A 1ST END"

AAJF

THREAD DIRECTION

RIGHT-HAND 1ST END"

AAJF

THREAD DIRECTION

RIGHT-HAND 2ND END"

AARX

INSIDE DIAMETER

0.500 INCHES NOMINAL"

ABJH

TEMP RATING

-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE"

ABKV

OUTSIDE DIAMETER

0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM"

ACKH

MINIMUM INSIDE BENDING RADIUS

7.000 INCHES"

AHNC

CONNECTION STYLE

EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END"

AHNC

CONNECTION STYLE

FLARED 1ST END"

AKUU

END CONNECTION DESIGN

STRAIGHT 1ST END"

AKUU

END CONNECTION DESIGN

STRAIGHT 2ND END"

AKXL

END FITTING COMPONENT AND MATERIAL

COMPLETE FITTING STEEL ALL ENDS"

AKXM

FITTING COMPONENT AND SURFACE TREATMENT

COMPLETE FITTING CADMIUM 1ST END"

AWLS

CONNECTION TYPE

THREADED EXTERNAL BOSS 2ND END"

AWLS

CONNECTION TYPE

THREADED EXTERNAL TUBE 1ST END"

CQBD

BURST TEST PRESSURE

14000.0 POUNDS PER SQUARE INCH"

CQCS

LAYER COMPOSITION AND LOCATION

1ST LAYER BRAIDED STEEL WIRE"

CQCS

LAYER COMPOSITION AND LOCATION

2ND LAYER MOLDED RUBBER, SYNTHETIC"

CQCS

LAYER COMPOSITION AND LOCATION

3RD LAYER BRAIDED STEEL WIRE"

CQCS

LAYER COMPOSITION AND LOCATION

OUTER LAYER MOLDED RUBBER, SYNTHETIC"

CQGM

MAXIMUM OPERATING PRESSURE

3500.0 POUNDS PER SQUARE INCH"

CQJX

NOMINAL THREAD SIZE

0.875 INCHES 1ST END"

CQJX

NOMINAL THREAD SIZE

0.875 INCHES 2ND END"

CQRB

SEAT ANGLE

37.0 DEGREES 1ST END"

CRDW

HYDROSTATIC TEST PRESSURE

7000.0 POUNDS PER SQUARE INCH"

CRJM

OUTER COVERING ENVIRONMENTAL PROTECTION

ABRASION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF"

CRWL

INSIDE SURFACE CONDITION

SMOOTH"

CRXX

MEASURING METHOD AND LENGTH

91.000 INCHES NOMINAL OVERALL"

FEAT

SPECIAL FEATURES

INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; PRESS-ON TYPE FITTINGS"

MEDA

MEDIA FOR WHICH DESIGNED

FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE"

THSD

THREAD SERIES DESIGNATOR

UNF 1ST END"

THSD

THREAD SERIES DESIGNATOR

UNF 2ND END"

ZZZK

SPECIFICATION/STANDARD DATA

SAE 100R2,TYPE A NATIONAL STD/SPEC"

AAGR

CROSS-SECTIONAL SHAPE STYLE

ROUND"

AAJD

THREAD CLASS

1A 2ND END"

AAJD

THREAD CLASS

2A 1ST END"

AAJF

THREAD DIRECTION

RIGHT-HAND 1ST END"

AAJF

THREAD DIRECTION

RIGHT-HAND 2ND END"

AARX

INSIDE DIAMETER

0.500 INCHES NOMINAL"

ABJH

TEMP RATING

-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE"

ABKV

OUTSIDE DIAMETER

0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM"

ACKH

MINIMUM INSIDE BENDING RADIUS

7.000 INCHES"

AHNC

CONNECTION STYLE

EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END"

AHNC

CONNECTION STYLE

FLARED 1ST END"

AKUU

END CONNECTION DESIGN

STRAIGHT 1ST END"

AKUU

END CONNECTION DESIGN

STRAIGHT 2ND END"

AKXL

END FITTING COMPONENT AND MATERIAL

COMPLETE FITTING STEEL ALL ENDS"

AKXM

FITTING COMPONENT AND SURFACE TREATMENT

COMPLETE FITTING CADMIUM 1ST END"

AWLS

CONNECTION TYPE

THREADED EXTERNAL BOSS 2ND END"

AWLS

CONNECTION TYPE

THREADED EXTERNAL TUBE 1ST END"

CQBD

BURST TEST PRESSURE

14000.0 POUNDS PER SQUARE INCH"

CQCS

LAYER COMPOSITION AND LOCATION

1ST LAYER BRAIDED STEEL WIRE"

CQCS

LAYER COMPOSITION AND LOCATION

2ND LAYER MOLDED RUBBER, SYNTHETIC"

CQCS

LAYER COMPOSITION AND LOCATION

3RD LAYER BRAIDED STEEL WIRE"

CQCS

LAYER COMPOSITION AND LOCATION

OUTER LAYER MOLDED RUBBER, SYNTHETIC"

CQGM

MAXIMUM OPERATING PRESSURE

3500.0 POUNDS PER SQUARE INCH"

CQJX

NOMINAL THREAD SIZE

0.875 INCHES 1ST END"

CQJX

NOMINAL THREAD SIZE

0.875 INCHES 2ND END"

CQRB

SEAT ANGLE

37.0 DEGREES 1ST END"

CRDW

HYDROSTATIC TEST PRESSURE

7000.0 POUNDS PER SQUARE INCH"

CRJM

OUTER COVERING ENVIRONMENTAL PROTECTION

ABRASION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF"

CRWL

INSIDE SURFACE CONDITION

SMOOTH"

CRXX

MEASURING METHOD AND LENGTH

91.000 INCHES NOMINAL OVERALL"

FEAT

SPECIAL FEATURES

INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; PRESS-ON TYPE FITTINGS"

MEDA

MEDIA FOR WHICH DESIGNED

FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE"

THSD

THREAD SERIES DESIGNATOR

UNF 1ST END"

THSD

THREAD SERIES DESIGNATOR

UNF 2ND END"

ZZZK

SPECIFICATION/STANDARD DATA

SAE 100R2,TYPE A NATIONAL STD/SPEC"

NSN 4720-00-127-8966 (4720001278966) Hose Assembly Nonmetallic Parts Catalog

Manufacturer’s List for NSN 4720-00-127-8966

Part Number's List for NSN 4720-00-127-8966

Technical Characteristics of NSN 4720001278966

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts